A list of the contents of this article:

What to do with a box made of paper?

As shown in the picture, stuffed in the seam in the direction of the arrow, the same operation is done on the left and on the other side. 1 as shown in the picture, the paper trash can is ready, and we open it. 1 the production is completed, as shown in the following figure.

Define the size of the box: use a scale to measure the length, width, and height of the cardboard. Determine the size of the box you want and record these dimensions. Draw the template of the cardboard: use a ruler and pencil to mark the desired size on the cardboard.

Put the bottom of the two box parts opposite each other, and then use glue or double-sided tape to connect them. Measure the height and width of the box with a ruler, and then cut out a small rectangle as the lid of the box. Connect the lid of the box to the top of the box and secure it with glue or double-sided tape.

The first method: flip the cardboard box: take a piece of A4 paper, fold the short edge, cut off the rectangular edge to form a square paper. Fold the square paper in half along the center line of the square paper, and fold it into a small square paper again with the center line. Expand the small square paper and fold the four corners along the crease to the crease intersection to form a new square paper.

How to use paper to make a simple and beautiful box the simplest one: carefully tear open the bonding place of the toothpaste box or dessert box, glue both sides with your favorite colored paper, fold the original side of the package inside, and then stick it according to the grain.

How to fold a small carton

1. Measure the height and width of the box with a ruler, and then cut out a small rectangle as the lid of the box. Connect the lid of the box to the top of the box and secure it with glue or double-sided tape. Finally, you can use colored pencils or markers to paint or write on the box to increase aesthetics.

2. As shown in the picture, take a piece of rectangular paper and fold it in half twice. As shown in the picture, pull in the direction of the arrow and fold down the centerline. That's it, and then the other side does the same thing. The other side is folded like this, as shown in the following picture.

3. Prepare a square piece of paper, preferably hard. Fold in half along the middle of the square. Expand and fold the four vertices of the square to the center. Fold in half in the direction of the arrow as shown in the picture. Finally fold it into the figure and expand it.

Step 1: fold a square piece of paper in half, and then unfold it. Step 2: fold the four corners to the central point. Step 3: open the upper and lower triangles. Step 4: fold the sides to the center. Step 5: as shown in the picture, fold on the upper left and oblique to the right, and then expand.

5. The folding method of the carton is as follows: tool: a piece of A4 paper. Prepare a rectangular piece of paper and fold it in half. Then fold it in half again, as shown in the following figure. Pull back the half-folded side and press it into a triangle. The opposite side is also folded. Fold one side of the triangle into the middle line.

6. Wrap the extra parts below. Fold the lower paper in half along the diagonal, then fold the triangles on both sides into the paper layer, put the previously folded part into the folded carton, buckle a small rectangle in the middle, and then fold the paper towel and put it into the small carton. You can paste a small pattern on the box.

How to fold the cardboard box

Fold the bottom corner inside according to the crease to form the bottom of the box. In this way, a triangular box is folded. Method 3: the following tutorial is half of the box. Making two is the box. First, prepare three identical square sheets of paper.

Open the pocket formed by folding by hand, fold the structure shown in the circle into the inside of the origami box, and then fold and insert the triangular structure on the right side of the origami model to the left, and after insertion and fixing, there will be a triangular structure protruding outward on the other side.

Choose the width you like, and now it's time to fold the edge of the box. Fold the bottom edge of the small triangle up to the crease in the middle, turn to the other side, and fold in the same way, as shown in the picture.

First of all, prepare a piece of rectangular paper. Here is a piece of homework paper that the editor has at hand. Fold the paper in half. Fold in half again along the red line. Fold the left half of the edge along the center line as shown in the picture, and do the same on the right. Fold it on both sides. Then fold down to the right as indicated by the arrow, and fold back to the left on the right.

How to make a box by hand

1. Cut open the mouth of the milk bottle and fold the four sides of the milk box with pressure on the opposite side to make the shape above. Cut the wrapping paper you like into long strips and stick them on each side. Draw the size of the opening of the box, cut out the thickness of the square box lined with a song of pearl plate in the lid.

2. Fold one side of the square, then open it and flatten it to form the bottom of the box. Connect the bottom of the box to another rectangle and secure it with glue or double-sided tape. Repeat the above steps to make two identical box parts.

3. The simple way to make a cardboard box is as follows: first, we fold it in half to the middle, then expand it, and then fold it in half to the other side. As shown in the following picture: please click on the input picture description and then expand this piece of paper, you can see that the square paper is divided into four small squares, and then the four corners are folded in half to the middle.

4. Draw the size as shown in the picture on the paper jam and draw the grid with a pencil. Cut the two sides with an art knife. Fold it along the mark, and then glue it together to make a box with an opening. Then use the paper jam to cut out a paper jam the size of the picture. Cut off the edges.

How do you do the box?

Paper, scissors, glue, ruler and pencil. Step 2: design the box to determine the shape and size of the box and use a ruler and pencil to draw the shape on the paper. Step 3: make the box to draw the frame and bottom, cut it out with scissors, paste it with glue, and use a ruler and knife to adjust the position and angle.

2. The simplest kind of box: carefully tear open the bonding place of the toothpaste box or snack box, glue both sides with your favorite colored paper, fold the original side of the package inside, and then stick it according to the grain.

3. The simple way to make a cardboard box is as follows: first, we fold it in half to the middle, then expand it, and then fold it in half to the other side. As shown in the following picture: please click on the input picture description and then expand this piece of paper, you can see that the square paper is divided into four small squares, and then the four corners are folded in half to the middle.

4. How to do the box by hand is as follows: method 1: prepare a piece of square handmade paper with a side length of 10 centimeters, fold it in half along the edge, fold the upper and lower sides to the middle line. Fold the corner of the short side to the middle, turn the origami over, fold the bottom edge up, and fold the other corner up.

How to design the packing box

1. The understanding of the target audience: when designing the packaging box, we must first understand the target audience of the product. People of different ages, genders and cultural backgrounds have different needs and preferences for packaging. Through an in-depth understanding of the target audience, designers can create packaging designs that better meet their tastes and expectations, thereby improving the attractiveness of the product.

2. When customizing the printing box for the first time, you usually need to make digital samples, and sometimes even need to make real samples on the printing press for rigorous design. Because when printing digital samples again, it is possible to have different colors with digital samples when printing in large quantities, and printing machines can make sure that the colors are consistent in mass production.

3. Selecting appropriate design materials when selecting packaging design materials, we need to take into account the nature of the product itself and market needs, as well as environmental protection, beauty, quality and other factors. The best effect can be achieved by selecting the appropriate material. Layout planning and typesetting design is a very important link in packaging design.

4. Therefore, the creativity of the design and the difficulty of making the special-shaped box are greater than those of other box types. However, the structural shape of the special-shaped box packaging design is unique, which is rich in artistry and practicality, and the unique feature lies in the combination of the box surface, shape, quantity, direction, addition and subtraction. Can be made into a variety of shapes, mostly used for gift packaging.